Archives

Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5

Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5

Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5
Help Center 24/7 Support. Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5. Your information is safe. Always the correct part. No risk, no hassle. We know our products. Part Numbers: FS4044 (use HS4044, CS4024), HB4039, SL1000, IV4040(12), EV4040(12). The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace OE Part #: HS26334PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Multiple Layers Steel (MLS) Head Gasket. 16 Cylinder Head Bolts. 12 Intake Valves (1 Groove; Head 35.00mm x Stem 5.50mm x Length 116mm). 12 Exhaust Valves (1 Groove; Head 30.00mm x Stem 5.50mm x Length 114.10mm). Aftermarket (by Performance Part). Performance Part offer one of the widest selections in the industry. One of major strengths of Performance Part is their leadership in developing innovative technology. The company prides itself on adapting new and existing technologies to help produce high quality products. Performance Part has focused on research and development of various automotive engine parts. The company believes that this innovation will be the key to sustaining a market presence as the automotive industry continues to undergo change. Performance Part products are known for the high quality and durability, even under the most adverse of conditions. As with other companies, Performance Part runs their products through extensive testing before releasing them to market, so you can be sure you’re getting a quality product. Engine Intake Valve; Engine Exhaust Valve. OE Spec or Performance/Custom. Kit or Single Part. Cancer and Reproductive Harm. This part is compatible. 3.0L 2997CC V6 SOHC. (16 VALVE), ENG CODE “J30A5″. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Our goal is to provide our customers with the best products at the best price without compromising quality. We have been in the car parts business for over 20 years. We specialize in engine parts and accessories. All of our parts are specially made to meet or exceed OEM standards and performance requirements. No matter whether you’re doing basic repairs and maintenance, modifying your car’s engine, our great selection of brand name products and knowledgeable associates will ensure success with all your engine rebuild projects. We offer the finest and widest variety of engine parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide the best customer experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, we will be your one-stop shop. Do you have any questions? Our expert staffs are available 24/7 to help. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Valvetrain Components\Valves”. The seller is “performancepart” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: PP-5393831928
  • Manufacturer Warranty: Yes
  • Interchange Part Number: HS26334PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 305393831928

Full Gasket Set Intake Exhaust Valves Fit 06-07 Honda Accord V6 3.0L SOHC J30A5

Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE

Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE

Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE
Engine Intake Valve; Engine Exhaust Valve. Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE. View all associated offers. Ask an expert advisor. No pressure, no commission – just lots of good advice from our highly trained staff. Low Prices Always the best price. Guaranteed Fitment Consistently the correct parts. 24/7 Support Ask product experts. Part Numbers: FS2002 (use HS2002, CS2002), HB2002, SL1000, IV2002(4), IV2002S(4), EV2002(4). Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE Replace OE Part #: HS9483PT, CS9483. This full gasket set with intake and exhaust valves is just what you need to keep your car in good running order. The full gasket set with intake and exhaust valves that you will receive in this kit are high quality gaskets and valves that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These gaskets and intake and exhaust valves are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this full gasket set with intake and exhaust valves. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. 1.5L 1452CC L4 SOHC. (12 VALVE), ENG CODE “3E, 3EE”. 1.5L 1456CC L4 SOHC. 10 Cylinder Head Bolts. 4 Inner Intake Valves (Head 0.945″ x Stem 6.00mm x Length 3.61″). 4 Outer Intake Valves (Head 1.180″ x Stem 6.00mm x Length 3.63″). 4 Exhaust Valves (Head 1.220″ x Stem 6.00mm x Length 3.63″). Aftermarket (by Domestic Gaskets). Domestic Gaskets offers one of the widest selections in the industry, providing many products and solutions to consumers. One of primary strengths of Domestic Gaskets is their leadership in developing cutting-edge technology. As an industry leader, Domestic Gaskets prides itself on adapting new and existing technologies to help produce high quality products. The company believes that this innovation will be key to sustaining a market presence as the automotive industry continually undergoes new and exciting changes. Domestic Gaskets products are known for their high quality and durability, even under the most adverse conditions. All Domestic Gaskets products are put through rigorous testing before being released to market, so you can rest assured you’re getting a quality product. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Established in 2006, Domestic Gaskets is one of the top online engine parts and accessories distributors in the United States. We have a comprehensive catalog of over 10,000 engine parts and accessories from top aftermarket manufacturers to fit all domestic and foreign makes and models. And we offer these products at discounted rates. Customers can get up to 70% off on regular retail prices. Shopping at Domestic Gaskets entitles auto owners to budget offers that you won? T be able to find anywhere else. Utilizing several strategically placed warehouses in the United States, Domestic Gaskets makes sure your order is processed and delivered instantly to anywhere in the country, so you can get back on the road in no time at all. Do you have any questions? Our expert staffs are available 24/7. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “domesticgaskets” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Domestic Gaskets
  • Manufacturer Part Number: DG-8614979893
  • Warranty: Yes
  • Interchange Part Number: HS9483PT, CS9483
  • Compatible Engines: Graphite Head Gasket
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Full Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 738614979893

Full Gasket Set Intake Exhaust Valves Fit 87-94 Toyota Tercel 1.5L SOHC 3E 3EE

Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4

Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4

Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4
Gasket and Sealing System. Pistons, Rings, Rods & Parts. EGR Valves & Parts. Wheel Hubs, Seals, Bearings. Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Savings Instant Savings Available. 24/7 Support Ask product experts. Easy Return Quick, Simple. Part Numbers: 9-10824 (use 8-10824, 6-10123), HB10422, SL1000, IV10824L (x8), EV10824 (x8). The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace Part #: HS26517PT, ES72196, CS26223-1, IV323, EV314. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Multiple Layers Steel (MLS) Head Gasket. 14 Cylinder Head Bolts (10 Long Bolts, 4 Short Bolts). 8 Intake Valves (3 Grooves; Head 35.14mm x Stem 5.95mm x Length 102.30mm – 3 Grooves Type). 8 Exhaust Valves (3 Grooves; Head 30.15mm x Stem 5.96mm x Length 101.05mm – 3 Grooves Type). For international order: your country? S packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc. S seal, or plastic shrink wrapped has been opened. There is no-exceptions policy ensures the quality of the components you receive. No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products. Mizumo Auto Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than a decade. Our product lines represent affordability, quality, and performance to meet the demands of today? In addition, Mizumo parts meet or exceed the strict standards of QS9000, ISO9001, and ISO9002. Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, Viton? Valve stem seals, and graphite or MLS (multiple layer steel) head gaskets for superior sealing. Our gasket product line provides our customers with competitive cost coverage on popular late model domestic applications. For all your early to late model import needs we carry a full range of gaskets and internal engine parts in addition to our new product lines of: Timing Belts & Kits, Water Pump, Head Bolts. Mizumo Auto is located in Southern California, the most diversified import automotive market in the nation, thus, allowing the company to continually study market trends to help forecast future product needs, and enhance development to exceed industry standards of both quality and performance. Mizumo Auto offers national sales and support services along with a fast program to insure our clients get the parts they need now. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “mizumoauto” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: MA-9761310744
  • Warranty: Yes
  • Interchange Part Number: HS26517PT, ES72196, CS26223-1, IV323, EV314
  • Head Gasket Material: Multiple Layers Steel (MLS) Head Gasket
  • Engine Valve Material: Multiple Layers Steel (MLS) Head Gasket
  • Valves: 16
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • UPC: 739761310744

Full Gasket Set Intake Exhaust Valves Fit 10-13 Buick Verano Chevrolet GMC 2.4

Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB

Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB

Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB
Gasket and Sealing System. Pistons, Rings, Rods & Parts. EGR Valves & Parts. Wheel Hubs, Seals, Bearings. Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Remark: This kit fits engines from 04/09/1999 with plastic valve cover. Savings Instant Savings Available. 24/7 Support Ask product experts. Easy Return Quick, Simple. Part Numbers: FS5033 (use HS5033, CS5020), HB5021, SL1000, IV5033(8), EV5033(8). The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace Part #: HS9036PT2, ES72157, CS9036, IV158, EV158. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Multiple Layers Steel (MLS) Head Gasket. 10 Cylinder Head Bolts. 8 Intake Valves (3 Groove; Head 33.30mm x Stem 6.0mm x Length 115.00mm). 8 Exhaust Valves (3 Groove; Head 28.70mm x Stem 6.0mm x Length 117.20mm). For international order: your country? S packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc. S seal, or plastic shrink wrapped has been opened. There is no-exceptions policy ensures the quality of the components you receive. No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products. Mizumo Auto Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than a decade. Our product lines represent affordability, quality, and performance to meet the demands of today? In addition, Mizumo parts meet or exceed the strict standards of QS9000, ISO9001, and ISO9002. Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, Viton? Valve stem seals, and graphite or MLS (multiple layer steel) head gaskets for superior sealing. Our gasket product line provides our customers with competitive cost coverage on popular late model domestic applications. For all your early to late model import needs we carry a full range of gaskets and internal engine parts in addition to our new product lines of: Timing Belts & Kits, Water Pump, Head Bolts. Mizumo Auto is located in Southern California, the most diversified import automotive market in the nation, thus, allowing the company to continually study market trends to help forecast future product needs, and enhance development to exceed industry standards of both quality and performance. Mizumo Auto offers national sales and support services along with a fast program to insure our clients get the parts they need now. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “mizumoauto” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: MA-4216954205
  • Warranty: Yes
  • Interchange Part Number: HS9036PT2, ES72157, CS9036, IV158, EV158
  • Note: Fits engines from 04/09/1999 with plastic valve cover
  • Head Gasket Material: Multiple Layers Steel (MLS) Head Gasket
  • Engine Valve Material: Martensitic Steel Alloys
  • Valves: 16
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Full Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • UPC: 754216954205

Full Gasket Set Intake Exhaust Valves Fit 02-05 Chrysler Dodge Neon 2.0L ECB

Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L

Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L

Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L
Engine Intake Valve; Engine Exhaust Valve. Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Low Prices Always the best price. Guaranteed Fitment Consistently the correct parts. 24/7 Support Ask product experts. Part Numbers: 9-20725 (use HS8-20725, CS6-20225), HB20723, SL1000, IV20223(8), EV20223(8). Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L Replace OE Part #: HS26522PT, CS26521, ES72207, 9S4Z-6507-C, 9S4Z-6505-A, 9S4Z6507C, 9S4Z6505A, IV432, EV432. This gasket and instake exhaust valve set is just what you need to keep your car in good running order. The gasket and instake exhaust valve set that you will receive in this kit is a high quality gasket that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These gasket and instake exhaust valve sets are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this gasket and instake exhaust valve set. 2.5L 2488CC 152CID L4 DOHC. (16 VALVE), VIN CODE “7”. 2.5L 2488CC 152CID L4 ELECTRIC/GAS DOHC. (16 VALVE), VIN CODE “3”. (16 VALVE), VIN CODE “G”. (16 VALVE), VIN CODE “A”. Multiple Layers Steel (MLS) Head Gasket. 10 Cylinder Head Bolts. 8 Intake Valves (1 Groove; Head 35.00mm x Stem 5.50mm x Length 103.50mm). 8 Exhaust Valves (1 Groove; Head 30.00mm x Stem 5.50mm x Length 105.00mm). Evergreen Auto Parts and Components Inc? Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than 18 years. Our product lines represent affordability, quality, and performance to meet the demands of today’s challenging market. In addition, Evergreen parts are made to meet or exceed the strict standard of QS9000, ISO9001, and ISO9002. Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, viton valve stem seals, and graphite or MLS head gaskets for superior sealing. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Established in 2008, Spark Automotive is one of the top online engine parts and accessories distributors in the United States. We have a comprehensive catalog of over 10,000 engine parts and accessories from top aftermarket manufacturers to fit all domestic and foreign makes and models. And we offer these products at discounted rates. Customers can get up to 70% off on regular retail prices. Shopping at Spark Automotive entitles auto owners to budget offers that you won? T be able to find anywhere else. Utilizing several strategically placed warehouses in the United States, Spark Automotive makes sure your order is processed and delivered instantly to anywhere in the country, so you can get back on the road in no time at all. Do you have any questions? Our expert staffs are available 24/7. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “sparkautomotive” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: SA-7308077583
  • Warranty: Yes
  • Interchange Part Number: HS26522PT, CS26521, ES72207, 9S4Z-6507-C, 9S4Z-6505-A, 9S4Z6507C, 9S4Z6505A, IV432, EV432
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 847308077583

Full Gasket Set Intake Exhaust Valves Fit 09-12 Ford Escape Mercury 2.5L

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Gasket and Sealing System. Pistons, Rings, Rods & Parts. EGR Valves & Parts. Wheel Hubs, Seals, Bearings. Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Savings Instant Savings Available. 24/7 Support Ask product experts. Easy Return Quick, Simple. Part Numbers: FS4040 (use HS4040, CS4024), HB4039, SL1000, IV4040(12), EV4040(12). The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace Part #: HS26265PT, HS26265PT-1, HS26265PT-5, HS26329PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Multiple Layers Steel (MLS) Head Gasket. 16 Cylinder Head Bolts. 12 Intake Valves (1 Groove; Head 35.00mm x Stem 5.50mm x Length 116mm). 12 Exhaust Valves (1 Groove; Head 30.00mm x Stem 5.50mm x Length 114.10mm). For international order: your country? S packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc. S seal, or plastic shrink wrapped has been opened. There is no-exceptions policy ensures the quality of the components you receive. No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products. Mizumo Auto Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than a decade. Our product lines represent affordability, quality, and performance to meet the demands of today? In addition, Mizumo parts meet or exceed the strict standards of QS9000, ISO9001, and ISO9002. Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, Viton? Valve stem seals, and graphite or MLS (multiple layer steel) head gaskets for superior sealing. Our gasket product line provides our customers with competitive cost coverage on popular late model domestic applications. For all your early to late model import needs we carry a full range of gaskets and internal engine parts in addition to our new product lines of: Timing Belts & Kits, Water Pump, Head Bolts. Mizumo Auto is located in Southern California, the most diversified import automotive market in the nation, thus, allowing the company to continually study market trends to help forecast future product needs, and enhance development to exceed industry standards of both quality and performance. Mizumo Auto offers national sales and support services along with a fast program to insure our clients get the parts they need now. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “mizumoauto” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: MA-9761301186
  • Warranty: Yes
  • Interchange Part Number: HS26265PT, HS26265PT-1, HS26265PT-5, HS26329PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263
  • Head Gasket Material: Multiple Layers Steel (MLS) Head Gasket
  • Engine Valve Material: Martensitic Steel Alloys
  • Valves: 24
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • UPC: 739761301186

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC

Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC

Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC
Engine Intake Valve; Engine Exhaust Valve. Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC. View all associated offers. Ask an expert advisor. No pressure, no commission – just lots of good advice from our highly trained staff. Low Prices Always the best price. Guaranteed Fitment Consistently the correct parts. 24/7 Support Ask product experts. Part Numbers: 9-21107 (use 8-21107, 6-21100), HB21100, SL1000, IV6054L (x8), EV6054L (x8). Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC Replace OE Part #: HS9790PT-7, ES72798, CS9790-4, IV4147, EV4147. This full gasket set with intake and exhaust valves is just what you need to keep your car in good running order. The full gasket set with intake and exhaust valves that you will receive in this kit are high quality gaskets and valves that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These gaskets and intake and exhaust valves are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this full gasket set with intake and exhaust valves. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. 4.6L 281CID V8 CNG SOHC. (16 VALVE), VIN CODE “9”. 4.6L 281CID V8 SOHC. (16 VALVE), VIN CODE “W”. Multiple Layers Steel (MLS) Head Gasket. 20 Cylinder Head Bolts. 8 Intake Valves (3 Grooves; Head 44.55mm x Stem 7.00mm x Length 116.70mm). 8 Exhaust Valves (3 Grooves; Head 34.00mm x Stem 6.97mm x Length 117.50mm). Aftermarket (by Domestic Gaskets). Domestic Gaskets offers one of the widest selections in the industry, providing many products and solutions to consumers. One of primary strengths of Domestic Gaskets is their leadership in developing cutting-edge technology. As an industry leader, Domestic Gaskets prides itself on adapting new and existing technologies to help produce high quality products. The company believes that this innovation will be key to sustaining a market presence as the automotive industry continually undergoes new and exciting changes. Domestic Gaskets products are known for their high quality and durability, even under the most adverse conditions. All Domestic Gaskets products are put through rigorous testing before being released to market, so you can rest assured you’re getting a quality product. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Established in 2006, Domestic Gaskets is one of the top online engine parts and accessories distributors in the United States. We have a comprehensive catalog of over 10,000 engine parts and accessories from top aftermarket manufacturers to fit all domestic and foreign makes and models. And we offer these products at discounted rates. Customers can get up to 70% off on regular retail prices. Shopping at Domestic Gaskets entitles auto owners to budget offers that you won? T be able to find anywhere else. Utilizing several strategically placed warehouses in the United States, Domestic Gaskets makes sure your order is processed and delivered instantly to anywhere in the country, so you can get back on the road in no time at all. Do you have any questions? Our expert staffs are available 24/7. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “domesticgaskets” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: DG-0664461273
  • Warranty: Yes
  • Interchange Part Number: HS9790PT-7, ES72798, CS9790-4, IV4147, EV4147
  • Compatible Engines: Multiple Layers Steel (MLS) Head Gasket
  • Material: Multiple Layers Steel (MLS) Head Gasket
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Sealed
  • UPC: 670664461273

Full Gasket Set Intake Exhaust Valves Fit 95-00 Ford Lincoln Mercury 4.6L SOHC

Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP

Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP

Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP
Engine Intake Valve; Engine Exhaust Valve. Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP. View all associated offers. Ask an expert advisor. No pressure, no commission – just lots of good advice from our highly trained staff. Low Prices Always the best price. Guaranteed Fitment Consistently the correct parts. 24/7 Support Ask product experts. Part Numbers: FS6022 (use HS6022, CS6022), SL1000, IV6022(8), EV6022(8). This full gasket set with intake and exhaust valves is just what you need to keep your car in good running order. The full gasket set with intake and exhaust valves that you will receive in this kit are high quality gaskets and valves that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These gaskets and intake and exhaust valves are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this full gasket set with intake and exhaust valves. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. 1.8L 112CID L4 DOHC. (16 VALVE), VIN CODE “8”. 1.8L 1839CC L4 DOHC. (16 VALVE), ENG CODE “BP”. Multiple Layers Steel (MLS) Head Gasket. 8 Intake Valves (Head 1.30″ x Stem 6.00mm x Length 3.99″). 8 Exhaust Valves (Head 1.10″ x Stem 6.00mm x Length 4.00″). Aftermarket (by Domestic Gaskets). Domestic Gaskets offers one of the widest selections in the industry, providing many products and solutions to consumers. One of primary strengths of Domestic Gaskets is their leadership in developing cutting-edge technology. As an industry leader, Domestic Gaskets prides itself on adapting new and existing technologies to help produce high quality products. The company believes that this innovation will be key to sustaining a market presence as the automotive industry continually undergoes new and exciting changes. Domestic Gaskets products are known for their high quality and durability, even under the most adverse conditions. All Domestic Gaskets products are put through rigorous testing before being released to market, so you can rest assured you’re getting a quality product. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Established in 2006, Domestic Gaskets is one of the top online engine parts and accessories distributors in the United States. We have a comprehensive catalog of over 10,000 engine parts and accessories from top aftermarket manufacturers to fit all domestic and foreign makes and models. And we offer these products at discounted rates. Customers can get up to 70% off on regular retail prices. Shopping at Domestic Gaskets entitles auto owners to budget offers that you won? T be able to find anywhere else. Utilizing several strategically placed warehouses in the United States, Domestic Gaskets makes sure your order is processed and delivered instantly to anywhere in the country, so you can get back on the road in no time at all. Do you have any questions? Our expert staffs are available 24/7. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “domesticgaskets” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Domestic Gaskets
  • Manufacturer Part Number: DG-8614980561
  • Warranty: Yes
  • Interchange Part Number: HS9717PT, HS9171PT-1, HS9791PT-2, CS9691-3, 021-3466, 021-3487, V4364, V4366
  • Compatible Engines: Multiple Layers Steel (MLS) Head Gasket
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Full Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 738614980561

Full Gasket Set Intake Exhaust Valves Fit 91-98 Mazda Kia Ford Mercury 1.8L BP

Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253

Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253

Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253
Engine Intake Valve; Engine Exhaust Valve. Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253. View all associated offers. Ask an expert advisor. No pressure, no commission – just lots of good advice from our highly trained staff. Low Prices Always the best price. Guaranteed Fitment Consistently the correct parts. 24/7 Support Ask product experts. Part Numbers: FS9012 (use HS9012, CS9008), HB9009, SL1000, IV9009(8), EV9009(8). Remark: Only fits “SOHC” Engine. “DOHC” Engine will “NOT” fit (except DOHC Turbo). Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253 Replace OE Part #: HS26170PT-1, ES72212, CS26170, 13201-AA362, 13202-AA371, 13201AA362, 13202AA371, IVSU11S, EVSU11S, IV710, EV710. This full gasket set with intake and exhaust valves is just what you need to keep your car in good running order. The full gasket set with intake and exhaust valves that you will receive in this kit are high quality gaskets and valves that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These gaskets and intake and exhaust valves are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this full gasket set with intake and exhaust valves. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. 2.5L 2458CC H4 SOHC. (16 VALVE), ENG CODE “EJ25″. Multiple Layers Steel (MLS) Head Gasket. 12 Cylinder Head Bolts. 8 Intake Valves (1 Groove; Head 36.00mm x Stem 6.00mm x Length 120.40mm). 8 Exhaust Valves (1 Groove; Head 31.40mm x Stem 6.00mm x Length 121.70mm). Aftermarket (by Domestic Gaskets). Domestic Gaskets offers one of the widest selections in the industry, providing many products and solutions to consumers. One of primary strengths of Domestic Gaskets is their leadership in developing cutting-edge technology. As an industry leader, Domestic Gaskets prides itself on adapting new and existing technologies to help produce high quality products. The company believes that this innovation will be key to sustaining a market presence as the automotive industry continually undergoes new and exciting changes. Domestic Gaskets products are known for their high quality and durability, even under the most adverse conditions. All Domestic Gaskets products are put through rigorous testing before being released to market, so you can rest assured you’re getting a quality product. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Established in 2006, Domestic Gaskets is one of the top online engine parts and accessories distributors in the United States. We have a comprehensive catalog of over 10,000 engine parts and accessories from top aftermarket manufacturers to fit all domestic and foreign makes and models. And we offer these products at discounted rates. Customers can get up to 70% off on regular retail prices. Shopping at Domestic Gaskets entitles auto owners to budget offers that you won? T be able to find anywhere else. Utilizing several strategically placed warehouses in the United States, Domestic Gaskets makes sure your order is processed and delivered instantly to anywhere in the country, so you can get back on the road in no time at all. Do you have any questions? Our expert staffs are available 24/7. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “domesticgaskets” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Domestic Gaskets
  • Manufacturer Part Number: DG-8614980837
  • Warranty: Yes
  • Interchange Part Number: HS26170PT-1, ES72212, CS26170, 13201-AA362, 13202-AA371, 13201AA362, 13202AA371, IVSU11S, EVSU11S, IV710, EV710
  • Remark: Only Fits SOHC Engine. DOHC will NOT fit (except DOHC Turbo)
  • Compatible Engines: Multiple Layers Steel (MLS) Head Gasket
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Full Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 738614980837

Full Gasket Set Intake Exhaust Valves Fit 04-09 Subaru 2.5L SOHC EJ253

Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI

Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI

Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI
Engine Intake Valve; Engine Exhaust Valve. Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI. View all associated offers. Ask an expert advisor. No pressure, no commission – just lots of good advice from our highly trained staff. Low Prices Always the best price. Guaranteed Fitment Consistently the correct parts. 24/7 Support Ask product experts. Part Numbers: 9-30157L (use HS8-30157L, CS6-30157-1), HB30157, SL1000, IV30157(8), EV30157(8). Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI Replace OE Part #: HS26423PT, CS26284, CS26284-1, ES72200, 53021550AA, 53021551AB, IV1160, EV1160. This full gasket set with intake and exhaust valves is just what you need to keep your car in good running order. The full gasket set with intake and exhaust valves that you will receive in this kit are high quality gaskets and valves that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These gaskets and intake and exhaust valves are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this full gasket set with intake and exhaust valves. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. 5.7L 345CID V8 FLEX OHV. (16 VALVE) VIN CODE “T”. 5.7L 345CID V8 OHV. (16 VALVE) VIN CODE “H”. Multiple Layers Steel (MLS) Head Gasket. 30 Cylinder Head Bolts (20 Long Bolts, 10 Short Bolts). 8 Intake Valves (3 Groove; Head 50.80mm x Stem 7.90mm x Length 125.20mm). 8 Exhaust Valves (3 Groove; Head 39.50mm x Stem 7.94mm x Length 123.10mm). Aftermarket (by Domestic Gaskets). Domestic Gaskets offers one of the widest selections in the industry, providing many products and solutions to consumers. One of primary strengths of Domestic Gaskets is their leadership in developing cutting-edge technology. As an industry leader, Domestic Gaskets prides itself on adapting new and existing technologies to help produce high quality products. The company believes that this innovation will be key to sustaining a market presence as the automotive industry continually undergoes new and exciting changes. Domestic Gaskets products are known for their high quality and durability, even under the most adverse conditions. All Domestic Gaskets products are put through rigorous testing before being released to market, so you can rest assured you’re getting a quality product. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Established in 2006, Domestic Gaskets is one of the top online engine parts and accessories distributors in the United States. We have a comprehensive catalog of over 10,000 engine parts and accessories from top aftermarket manufacturers to fit all domestic and foreign makes and models. And we offer these products at discounted rates. Customers can get up to 70% off on regular retail prices. Shopping at Domestic Gaskets entitles auto owners to budget offers that you won? T be able to find anywhere else. Utilizing several strategically placed warehouses in the United States, Domestic Gaskets makes sure your order is processed and delivered instantly to anywhere in the country, so you can get back on the road in no time at all. Do you have any questions? Our expert staffs are available 24/7. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “domesticgaskets” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Domestic Gaskets
  • Manufacturer Part Number: DG-0664444481
  • Warranty: Yes
  • Interchange Part Number: HS26423PT, CS26284, CS26284-1, ES72200, 53021550AA, 53021551AB, IV1160, EV1160
  • Compatible Engines: Multiple Layers Steel (MLS) Head Gasket
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 670664444481

Full Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Jeep Dodge 5.7 HEMI