Anbull Brand New 100CC 2 Stroke bicycle engine kits. The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Load capacity : 180kg Fuel Type : 90#; N. Fits for most 26 or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″). 100cc Bike Engine Kit- 50mm bore single piece cylinder, an upgraded CDI, Performance Speed Carburetor and more, high performance Speed carb, silver anti-corrosion coating, high performance CDI with Yamaha components, improved magneto, high end allen bolts, improved gas cap. Be assured the mixing ratio for fuel and oil:16:1 for break period (first 300-500 miles) / 20:1 after (18:1 is much better in summer because of the hot weather);air cylinder might take some time to adjust to the load. Thus to avoid possible complications for the motor, please limit the riding time to a maximum of 1 hour for the first few rides. We will definitely solve it for you. Engine type : Gasoline engine Borestoke : 50mmx40mm Ignition Mode : Latest version CDI Ignition Max. Power : 2.5HP / 1.9KW (At 5500 r / min conditions) Compression ratio : 81 Total Transmission ratio : 181 Start Mode: Pedal start Lubricating oil : Two-stroke machine oil Ratio of gasoline to 2-stroke motorcycle lubricants 16:1 for new sets, 20:1 after running 500km. Parking plug : Z4C 16MM Tank capacity : 2L Fuel consumption: Driving on flat roads at an economic speed of 20-25 km/h, fuel consumption of 3-3.5L/100 km Cooling : Air-cooling Shifting way : Sprocket Max. Speed : 48km/hFor your safety, it is recommended to drive at a medium speed! Procket: 44 Tooth Rear Sprocket Drive chain: 415 reinforced chain Spark plug model: 4135 Max. Load capacity : 180kg Fuel Type : 90# Total engine weight: 11 kg (including fuel tank and all accessories) G. W : 12.5kg Ctn size : 42x37x18CM. Spark plug wrench, fuel tank, fuel pipe, carburetor, gasoline filter, igniter, exhaust pipe, protective chain cover, guide wheel assembly, 415 chain, 44 tooth sprocket, screw accessory kit, throttle grip cover, throttle cable, Clutch line, clutch handle, flameout switch, English manual. It is recommended to use the matching kit in the package when installing this product. Before starting the engine, close the damper on the carburetor, and then open the damper on the carburetor after the engine is started. When the engine is running normally, the damper cannot be closed, otherwise the engine will be stalled. Not fit for: 26 Bayside Men’s Cruiser Bike. Focuses on its own brand and service, only to provide customers with high-quality products and services, and refuses to sell customers any low-cost and inferior products! Do not make the lowest price and the highest price, only make high quality and cost-effective products! No APO/FPO addresses or PO Boxes allowed. Local pickups is not provided at this time. We are not responsible for undeliverable addresses. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “Anbull Full Set 100CC Bike Bicycle Engine Gas Motor Motorized Kit 2 Stroke US” is in sale since Wednesday, January 13, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “anbull_01″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.

• Lubricating oil: Two-stroke machine oil
• Type of Sparking Plug: Z4C 16MM
• Size: 100CC
• Feature 1: High Performance
• Color: Black
• Manufacturer Part Number: Does Not Apply
• UPC: Does not apply
• MPN: Does Not Apply
• Compression Ratio: 81
• Suitable for: 26″ 28″ Bike
• Fuel Type: 90#
• Engine type: Gasoline engine
• Brand: ANBULL
• Fuel Consumption: 3-3.5L/100 km
• Type: Motor
• Tank Capacity: 2L
• EAN: Does not apply
• Start mode: Pedal start
• Cooling Mode: Air-cooling
• Engine Displacement: 100CC
• Engine: 2 Stroke
• Ignition Mode: Latest version CDI Ignition