Daily Archives: November 13, 2019

NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)

NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)
NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)
NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)
NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)
NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)
NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)

NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)
PRE-LOOMED & PRE-MAPPED NODIZ GEN2 FORD ZETEC SYSTEM. If you have the factory Coil Pack and Crank Sensor on your Zetec/Duratec, and are using carbs for fuelling, then this package is EVERYTHING you need to have it up and running in MINUTES! Its a fully 3D map-able ignition system that varies the engines ignition advance based on both speed and optionally if required throttle position/manifold pressure. It benefits from inbuilt coil drivers, (so no need for EDIS modules or external igniters), as well as it also supporting factory trigger wheels as used on various engines such as Vauxhall, Peugeot, Citroen, VW and of course Ford. The units arrive with a fully terminated loom to suit the engine it has been configured for (FORD in this case please see the images to confirm they match your engine), as well as loaded with an optimised base-map that has been developed in house on our L&S engine dynamometer and rolling road tuned our Dyno-Dynamics rolling road. If you would like to see how quickly your engine can be up and running. Check out this example. On a customers track car running a Ford Zetec. A recap of the NODIZ Pros features. 3D Mappable Ignition Controller with Inbuilt Coil Drivers No EDIS Module or other parts required. Dyno optimised preloaded ignition map excellent power results, safe and reliable. Soft & Hard Cut Limiters keep the engine safe at high rpms. Launch Control for perfect launches every time. Programmable Outputs For Shift Lights/VTEC/VVT/Fans etc. 12V Tachometer Output suits most OEM dashboards. Splash-Proof and small form factor mount easily in the engine bay. Custom Tune-able with the free EZ-Tune Software Custom mapping if you want it via Bluetooth or RS232 Serial Connection. Bluetooth Use the included USB Dongle or use the free dash App for Android. What you will receive. Brand new NODIZ Pro Ignition System with in-house Dyno optimised pre-loaded ignition map. Wiring Loom pre-made and fitted with crank sensor and coil pack connector, power and ground eyelets and flying leads for TPS/MAP sensor. (Check Images to Ensure correct plugs). Spare Pins for the other features such as shift light, launch control, tacho, etc. If you only have USB, select the optional FTDI Serial -> USB Cable. In addition to the above most direct and simple installation, the NODIZ Pro also features the following. 16 Load by 16 Speed Sites, with full 3D interpolation and user definable Speeds/Loads. User settable RPM Soft and Hard Cut Rev Limiters. In-built coil drivers, no need for EDIS or other modules. Cranking based advance angle to help start high compression engines. A programmable Shift Light output. A programmable output based on either RPM i. V-TEC control, coolant temperature i. Fan Control or Intake temperature i. Bluetooth & Serial Communication and Free Dash App. Digital Dash for Android. Android dashboard software is available from the Google Play store, free of charge. Whats in the box? Plug-n-Play Ford Loom (Zetec style crank sensor and coil pack required). The item “NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)” is in sale since Friday, June 7, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “motorsport-electronics” and is located in Westbury, Wiltshire. This item can be shipped worldwide.
  • Manufacturer Part Number: ND-NDZZETEC
  • Brand: Motorsportelectronics
  • Part Manufacturer: Motorsport Electronics Limited

NODIZ 3D Ignition ECU with FULL LOOM for ZETEC Engine (Gen2)

Exedy Clutch Kit Honda CIVIC 1.8 3 Piece Clutch Kit Inc. Bearing

Exedy Clutch Kit Honda CIVIC 1.8 3 Piece Clutch Kit Inc. Bearing

Exedy Clutch Kit Honda CIVIC 1.8 3 Piece Clutch Kit Inc. Bearing
EXEDY CLUTCH KIT – HONDA CIVIC 1.8 3 PIECE CLUTCH KIT INC. We are dedicated to ensuring the highest possible quality service to our customers. Our dispatch warehouse take great care and attention to ensure every package is carefully packaged and labeled and ready for dispatch in a timely manor. All orders are processed usually within hours of the order being confirmed, they are processed and packed and ready to leave us in the first available post. We use only reliable couriers to ensure your order gets to you in a perfect condition, and on time. Should you return the item please remember to include your user name and item number with the item so we can deal with it promptly. Made with love by. The item “EXEDY CLUTCH KIT HONDA CIVIC 1.8 3 PIECE CLUTCH KIT INC. BEARING” is in sale since Tuesday, August 23, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Transmission & Drivetrain\Complete Clutch Kits”. The seller is “123_autocare” and is located in United Kingdom. This item can be shipped worldwide.
  • Country/Region of Manufacture: Japan
  • Clutch Kit Type: Friction Clutch
  • Manufacturer Part Number: HCK2021
  • Brand: Exedy
  • Placement on Vehicle: Front

Exedy Clutch Kit Honda CIVIC 1.8 3 Piece Clutch Kit Inc. Bearing