Archives

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Help Center 24/7 Support. Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A. Your information is safe. Always the correct part. No risk, no hassle. We know our products. Part Numbers: FS4040 (use HS4040, CS4024), HB4039, SL1000, IV4040(12), EV4040(12). The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace OE Part #: HS26265PT, HS26265PT-1, HS26265PT-5, HS26329PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Multiple Layers Steel (MLS) Head Gasket. 16 Cylinder Head Bolts. 12 Intake Valves (1 Groove; Head 35.00mm x Stem 5.50mm x Length 116mm). 12 Exhaust Valves (1 Groove; Head 30.00mm x Stem 5.50mm x Length 114.10mm). Aftermarket (by Performance Part). Performance Part offer one of the widest selections in the industry. One of major strengths of Performance Part is their leadership in developing innovative technology. The company prides itself on adapting new and existing technologies to help produce high quality products. Performance Part has focused on research and development of various automotive engine parts. The company believes that this innovation will be the key to sustaining a market presence as the automotive industry continues to undergo change. Performance Part products are known for the high quality and durability, even under the most adverse of conditions. As with other companies, Performance Part runs their products through extensive testing before releasing them to market, so you can be sure you’re getting a quality product. Engine Intake Valve; Engine Exhaust Valve. OE Spec or Performance/Custom. Kit or Single Part. Cancer and Reproductive Harm. This part is compatible. 3.5L 3471CC V6 SOHC. (24 VALVE), ENG CODE “J35A5″. (24 VALVE), ENG CODE “J35A8″. 3.2L 3210CC V6 SOHC. (24 VALVE), ENG CODE “J32A3″. (24 VALVE), ENG CODE “J35A6″. (24 VALVE), ENG CODE “J35A7″. (24 VALVE), ENG CODE “J35A9″. We firmly believe our parts are free from any defects in workmanship, material and that all manufacturing is processed under a strict quality control environment. Absolutely no exchanges will be made for any products that has been damaged, misused or improperly installed. We highly recommend that a licensed professional bear the responsibility of proper installation. Our goal is to provide our customers with the best products at the best price without compromising quality. We have been in the car parts business for over 20 years. We specialize in engine parts and accessories. All of our parts are specially made to meet or exceed OEM standards and performance requirements. No matter whether you’re doing basic repairs and maintenance, modifying your car’s engine, our great selection of brand name products and knowledgeable associates will ensure success with all your engine rebuild projects. We offer the finest and widest variety of engine parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide the best customer experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, we will be your one-stop shop. Do you have any questions? Our expert staffs are available 24/7 to help. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Valvetrain Components\Valves”. The seller is “performancepart” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: PP-5393831904
  • Manufacturer Warranty: Yes
  • Interchange Part Number: HS26265PT, HS26265PT-1, HS26265PT-5, HS26329PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263
  • Material: Martensitic Steel Alloys
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • Greasable or Sealed: Cancer and Reproductive Harm.
  • UPC: 305393831904

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A
Gasket and Sealing System. Pistons, Rings, Rods & Parts. EGR Valves & Parts. Wheel Hubs, Seals, Bearings. Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Savings Instant Savings Available. 24/7 Support Ask product experts. Easy Return Quick, Simple. Part Numbers: FS4040 (use HS4040, CS4024), HB4039, SL1000, IV4040(12), EV4040(12). The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace Part #: HS26265PT, HS26265PT-1, HS26265PT-5, HS26329PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Multiple Layers Steel (MLS) Head Gasket. 16 Cylinder Head Bolts. 12 Intake Valves (1 Groove; Head 35.00mm x Stem 5.50mm x Length 116mm). 12 Exhaust Valves (1 Groove; Head 30.00mm x Stem 5.50mm x Length 114.10mm). For international order: your country? S packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc. S seal, or plastic shrink wrapped has been opened. There is no-exceptions policy ensures the quality of the components you receive. No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products. Mizumo Auto Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than a decade. Our product lines represent affordability, quality, and performance to meet the demands of today? In addition, Mizumo parts meet or exceed the strict standards of QS9000, ISO9001, and ISO9002. Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, Viton? Valve stem seals, and graphite or MLS (multiple layer steel) head gaskets for superior sealing. Our gasket product line provides our customers with competitive cost coverage on popular late model domestic applications. For all your early to late model import needs we carry a full range of gaskets and internal engine parts in addition to our new product lines of: Timing Belts & Kits, Water Pump, Head Bolts. Mizumo Auto is located in Southern California, the most diversified import automotive market in the nation, thus, allowing the company to continually study market trends to help forecast future product needs, and enhance development to exceed industry standards of both quality and performance. Mizumo Auto offers national sales and support services along with a fast program to insure our clients get the parts they need now. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Gaskets, Seals & Hardware\Gasket Kits”. The seller is “mizumoauto” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Aftermarket Products
  • Manufacturer Part Number: MA-9761301186
  • Warranty: Yes
  • Interchange Part Number: HS26265PT, HS26265PT-1, HS26265PT-5, HS26329PT, CS26196, ES71329-1, 14711-P8E-A00, 14721-P8E-A00, 14711P8EA00, 14721P8EA00, IV263, EV263
  • Head Gasket Material: Multiple Layers Steel (MLS) Head Gasket
  • Engine Valve Material: Martensitic Steel Alloys
  • Valves: 24
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit
  • Type: Engine Intake Valve; Engine Exhaust Valve
  • Kit Parts Included: Head Gasket Set
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: OE Spec
  • UPC: 739761301186

Full Gasket Set Intake Exhaust Valves Fit 05-09 Acura Honda 3.2L 3.5L J32A3 J35A